Step 1: Update and Upgrade Step 2: Download and Install Docker on Raspberry Pi Step 3: Add a Non-Root User to Docker Group Step 4: Check Docker Version and Info Check version Check system-wide information Step 5: Run a Container Test if Docker is working by installing Hello World container
How to: Install Docker on Raspberry Pi Read More »
Power off your Raspberry Pi. Remove the SD card. Insert the SD card into your card reader on your computer. Access your SD card boot directory. Create a new empty file named ssh (without any extension). Remove SD card and put it back in your Raspberry Pi.
How to: Enable SSH on Raspberry Pi Without a Screen Read More »
Step 01: Update system Step 02: Join ZeroTier Network ZeroTier Central (https://my.zerotier.com/) is where you can setup and control your virtual network and manage connected devices. Register and account and create a network here: https://my.zerotier.com/networkYou should: Change network name Check IPv4 Auto-Assign and ensure the UP range is not conflicting with some of your own
How to: Install ZeroTier on Raspberry Pi Read More »
Crontab is used for configuring scheduled tasks on Raspberry Pi. In short, cron is the name of the tool, crontab is the cron table listing the jobs that cron will be executing while these socalled jobs are cronjobs. How to edit crontab on Raspberry Pi Run crontab (cron table) with the -e flag to edit
Crontab on Raspberry Pi Read More »
Proftpd is a modular FTP server, which has been around for a long time. Probably the most installed FTP server. If you want a FTP server with the most flexible setup, go with this one. Step 1: Install proftpd Step 2: Configure proftpd on Raspberry Pi Step 2.1: Examples of changes Step 3: Restart proftpd
How to: Install Proftpd on Raspberry Pi Read More »
If you are missing the SWAP partition, you can install it manually. Step 1: Install swap on Raspberry Pi Step 2: Start swap on Raspberry Pi
How to: Install missing swap partition on Raspberry Pi Read More »
Step 1: Temporarily stop swap on Raspberry Pi: Step 2: Modify swap size on Raspberry Pi Change CONF_SWAPSIZE to e.g. 1024 for 1024MB / 1GB. Step 3: Re-initialize the Raspberry Pi’s swap Step 4: Start swap on Raspberry Pi Note: I/O activity Using swap can increase I/O activity on the MicroSD card increasing chances of
How to: Increase swap on Raspberry Pi Read More »
What you’ll need to get started MicroSD Card Power Keyboard (Optional) Mouse (Optional) Case (Optional) Raspberry Pi Zero Specifications 1GHz single-core CPU 512MB RAM Mini HDMI port Micro USB OTG port Micro USB power HAT-compatible 40-pin header Composite video and reset headers CSI camera connector (v1.3 only)
Step 1: Update If you need to only stream, no transcode, then the Raspberry Pi is the perfect little Plex Media Server. I’ll recommend to install PMS when you’ve set up your Pi with an external HDD. My output looks like If you don’t have en_US.utf8, you have to generate it. and uncomment: and generate
How to: Install Plex Media Server on Raspberry Pi Read More »
Step 1: Open Crontab on Raspberry Pi Step 2: Add Cronjob to Raspberry Pi
How to: Apt-update and apt-upgrade as Cronjob on Raspberry Pi Read More »
Step 1: Open envvars File on Raspberry Pi The file we need to edit is located in /etc/apache2/envvars and you can change it with: Step 2: Change envvars File on Raspberry Pi Change the following data from to Step 3: Chown [user]
How to: Change www-data User to [user] on Raspberry Pi Read More »